Part of the HP-UX 11i v2 September 2004 release is delivered via patches, and these patches are designated as "required" patches at the HPE Support Center. If you attempt to download one of these required patches individually from the HPE Support Center, you will be given the following warning:
After running the "Patch Analysis" you can automatically download the necesary software and create a SD-UX software depot to install the required patches. Note that standard patch bundles are consider requisite of most latest patches and the Patch Analsysis may sugguest to download and install any missing standard patch bundle.
In order to match our compiler build environment, users will need to installthe HP ANSI C and C++ compilers and apply appropriate patches.Here's a list of our setup(as of 5th October 2010, patch information and downloads nowrequirea software support contract and you must be logged into the appropriate ITRC account before clicking the patch links below):
Revision: 8.0 - Dec 2009This document shows how to install and configure the Eloquencedatabase in the HP-UX platform in a few simple steps. For a detailed description, please referto the Eloquence Installation and Configuration Manualand the B.08.00 release notes.A separate document exists that covers the Windows platform specifics.As Linux is simlar in priciple to HP-UX, most of this documentapplies to Linux as well.Contents Installation Obtaining the product Obtaining Eloquence product patches HP-UX patches Installation of the Eloquence product on HP-UX Configuring the Eloquence product Configuring the HP-UX Kernel Setup the Eloquence data base environment Creating a data base Moving your data baseInstallationObtaining the productThe Eloquence product is available for download from the Eloquence web site . This is the preferred distribution method. A CD-ROM media can be ordered as an alternative for an additionalcharge. select appropriate subdirectory, according to thetarget platform (eg. hpux for HP-UX).As an alternative you may access the Eloquence FTP server at Note: Please take care to use binary mode for download with ftp.For the HP-UX platform, the following depot files are available:Eloquence-B0800-*-pa20.depot.gzPA-RISC 2.0This is the default installation depot for PA-RISC based systems. It should work an almost all PA-RISC systems and supports both 32 and 64 bit applications. This build requires HP-UX 11.11 or later.Eloquence-B0800-*-pa11.depot.gzPA-RISC 1.1This installation depot is intended to support historic PA-RISC hardware and should only by used on 32 bit PA-RISC systems. This build requires HP-UX 11.11 or later.Eloquence-B0800-*-ia64.depot.gzItaniumThis Eloquence depot file should be used for HP Integrity systems (Itanium platform). It installs both 32 bit and 64 bit components and also includes limited support for PA-RISC applications using the ARIES PA-RISC emulation. This build requires HP-UX 11.23 or later.The asterisk (*) denotes the version of the installation archive. Higher numbers indicate a newer installation archive. For the Linux platform, the following RPM files are available:Eloquence.B0800-*.i686.rpm x86 Eloquence rpm file (x86, 32 bit)Eloquence.B0800-*.x86_64.rpm x64 Eloquence rpm file (x86_64, 64 bit).This build requires a 64 bit OS running on AMD64/EM64T (x86_64) based systems. Includes support for 32 bit x86 applications.Eloquence.B0800-*.ia64.rpm ia64 Eloquence rpm file (Itanium2, 64 bit). Includes support for 32 bit x86 applications.The asterisk (*) denotes the version of the RPM archive. Higher numbers indicate a newer installation archive.Obtaining Eloquence product patchesEloquence patches are provided to either fix a defect or limitation that was found after release and/or to add new functionality.Installation of the current product patches is stronglyrecommended.For an overview on available patches, please refer to the Eloquence B.08.00 patch overview document. simpify new installations a patch bundle is available that combinesthe recommended patches for various Eloquence product components in a single archive. HP-UX patchesThe following HP-UX patches are required to use Eloquence.Please install these patches (or successors) on your HP-UX system.HP-UX 11i v2 (11.23) PHCO_37940 - pthread library cumulative patch PHNE_37670 - cumulative ARPA Transport patch PHKL_37121 - ksleep kwakeup performance cumulative patch PHCO_37115 - libxcurses cumulative patch PHKL_32542 - swapcontext(), gethrtime() 2b1af7f3a8